show date;

  • 1534

    產品: 1534

    Production Description :

    Suitable for drilling IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≥200℃ such as RO4xxx, Arlon 25x, Isola IS 620. Suitable for drilling glass, quartz, technical ceramics such as Al2O3, AlN, ZrO2, SiC and Silicon.

    Production Advantage :

    • Ideally suited for drilling of IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≧ 200℃ such as RO4xxx, Arlon 25x, Isola IS 620

     


    Continue reading →
  • 159X

    產品: 159X

    Production Description :

    Suitable for chamfering of holes and contours in IMS and PCBs.

    Production Advantage :

    Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

     


    Continue reading →
  • 1638

    產品: 1638

    Production Description :

    Suitable for drilling IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≥200℃ such as RO4xxx, Arlon 25x, Isola IS 620

    Production Advantage :

    • Ideally suited for drilling of IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≧ 200℃ such as RO4xxx, Arlon 25x, Isola IS 620

     


    Continue reading →
  • 1640

    產品: 1640

    Production Description :

    Suitable for drilling halogen-free material, laminate with fillers and high Tg material ≥150℃

    Production Advantage :

    • Ideally suited for drilling of IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≧ 200℃ such as RO4xxx, Arlon 25x, Isola IS 620

     


    Continue reading →
  • 1639

    產品: 1639

    Production Description :

    Suitable for drilling 5G materials

    Production Advantage :

    特殊刀型,有助于排屑

     


    Continue reading →
  • 1835

    產品: 1835

    Production Description :

    Suitable for drilling IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≥200℃ such as RO4xxx, Arlon 25x, Isola IS 620. Suitable for drilling glass, quartz, technical ceramics such as Al2O3, AlN, ZrO2, SiC and Silicon.

    Production Advantage :

    • Ideally suited for drilling of IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≧ 200℃ such as RO4xxx, Arlon 25x, Isola IS 620

     


    Continue reading →
  • 1704 Square Chip Breaker w Drill Pt

    產品: 1704狼牙棒

    Production Description :

    • Routing of inner and outer contours in halogen free and high Tg material ≥ 150°C and for depaneling, also with copper on outer layers

    Production Advantage :

    Suitable for halogen-free and high Tg material ≥150℃ and laminates with fillers. Optimized chip removal and stronger bending strength.

     


    Continue reading →
  • 1200 鳳 梨 刀

    產品: 1200鳳梨刀

    Production Description :

    Suitable for high Tg up to 185℃ and laminate with fillers. Suitable for machining Melamine boards.

    Production Advantage :

    Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

     


    Continue reading →
  • 1250 鳳梨刀

    產品: 1250鳳梨刀

    Production Description :

    Suitable for routing CFRP, CFP and GRP such as Durostone® and Roedurtherm.

    Production Advantage :

    • Routing of inner and outer contours as well as for depaneling of assembled PCB
    • Well suited for high Tg up to 185°C and laminate with fillers
    • High dimensional accuracy and process capability

     


    Continue reading →
  • 138X 倒角刀

    產品: 138X倒角刀

    Production Description :

    • Suited for scoring and chamfering of flex-rigid PCB, high Tg material, laminate with fillers, aluminium and copper
    •Point angle=45°

    Production Advantage :

    Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

     


    Continue reading →
  • 159X 沉頭刀

    產品: 159X沉頭刀

    Production Description :

    Suitable for chamfering of holes and contours in IMS and PCBs.

    Production Advantage :

    Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

     


    Continue reading →
  • 1700 Spiral Cut Router (Chip Breaker)

    產品: 1700CB刀

    Production Description :

    • Ideally suited for halogen-free and high Tg material up to 185°C and laminate with fillers
    •Right hand cutting, right twisted (up cut)

    Production Advantage :

    Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

     


    Continue reading →
  • 1100x CB刀

    產品: 1100 CB刀

    Production Description :

    適合板邊要求高的產品;CNC 碳纖維、硬材料、PCB電路板。PCB特殊板材。

     

    Production Advantage :

    Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

     

    Continue reading →
desc==

    tags==

    Current tags====

    CNC===

    tag====

    Content

    • 1639

      產品: 1639

      Production Description :

      Suitable for drilling 5G materials

      Production Advantage :

      特殊刀型,有助于排屑

       


      Continue reading →
    • 1638

      產品: 1638

      Production Description :

      Suitable for drilling IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≥200℃ such as RO4xxx, Arlon 25x, Isola IS 620

      Production Advantage :

      • Ideally suited for drilling of IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≧ 200℃ such as RO4xxx, Arlon 25x, Isola IS 620

       


      Continue reading →
    • 1625

      產品: 1625

      Production Description :

      Suitable for drilling glass, quartz, technical ceramics such as Al2O3, AlN, ZrO2, SiC and Silicon.

      Production Advantage :

      耐磨性特佳,適合特硬材料

       


      Continue reading →
    • 159X

      產品: 159X

      Production Description :

      Suitable for chamfering of holes and contours in IMS and PCBs.

      Production Advantage :

      Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

       


      Continue reading →
    • 1534

      產品: 1534

      Production Description :

      Suitable for drilling IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≥200℃ such as RO4xxx, Arlon 25x, Isola IS 620. Suitable for drilling glass, quartz, technical ceramics such as Al2O3, AlN, ZrO2, SiC and Silicon.

      Production Advantage :

      • Ideally suited for drilling of IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≧ 200℃ such as RO4xxx, Arlon 25x, Isola IS 620

       


      Continue reading →
    • 1640

      產品: 1640

      Production Description :

      Suitable for drilling halogen-free material, laminate with fillers and high Tg material ≥150℃

      Production Advantage :

      • Ideally suited for drilling of IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≧ 200℃ such as RO4xxx, Arlon 25x, Isola IS 620

       


      Continue reading →
    • 1835

      產品: 1835

      Production Description :

      Suitable for drilling IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≥200℃ such as RO4xxx, Arlon 25x, Isola IS 620. Suitable for drilling glass, quartz, technical ceramics such as Al2O3, AlN, ZrO2, SiC and Silicon.

      Production Advantage :

      • Ideally suited for drilling of IMS, aluminium, copper, laminate with ceramic fillers and high Tg material ≧ 200℃ such as RO4xxx, Arlon 25x, Isola IS 620

       


      Continue reading →
    • 1328 雙刃刀

      產品: 1328雙刃刀

      Production Description :

      • Ideally suited for depth routing of IMS, aluminium and copper,laminate with ceramic fillers

      Production Advantage :

      Suitable for IMS made of aluminium and copper.

       


      Continue reading →
    • 1200 鳳 梨 刀

      產品: 1200鳳梨刀

      Production Description :

      Suitable for high Tg up to 185℃ and laminate with fillers. Suitable for machining Melamine boards.

      Production Advantage :

      Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

       


      Continue reading →
    • 1250 鳳梨刀

      產品: 1250鳳梨刀

      Production Description :

      Suitable for routing CFRP, CFP and GRP such as Durostone® and Roedurtherm.

      Production Advantage :

      • Routing of inner and outer contours as well as for depaneling of assembled PCB
      • Well suited for high Tg up to 185°C and laminate with fillers
      • High dimensional accuracy and process capability

       


      Continue reading →
    • 1312 單刃刀

      產品: 1312單刃刀

      Production Description :

      • Routing of inner and outer contours of IMS made copper, hybrid setup with RO3003, Glass-Teflon laminates as e.g. Taconic TLC-32

      Production Advantage :

      Suitable for IMS made of aluminium and copper.

       


      Continue reading →
    • GLXD 雙刃刀帶鑽頭

      產品: GLXD雙刃刀帶鑽頭

      Production Description :

      • Ideally suited for depth routing of IMS, aluminium and copper, laminate with ceramic fillers

      Production Advantage :

      Suitable for IMS made of aluminium and copper.

       


      Continue reading →
    • D210 Ball Nose End Mill

      產品: D210球刀

      Production Description :

      • Ideally suited for dental applications and technical ceramics such as ZrO2 and Al2O3

      Production Advantage :

      Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

       


      Continue reading →
    • 1764 Square Chip Breaker (Down Cut)

      產品: 1764左旋狼牙棒

      Production Description :

      • Ideally suited for halogen-free and high Tg material up to 185°C and laminate with fillers

      Production Advantage :

      Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

       


      Continue reading →
    • 1760 Spiral Cut Router (Down Cut)

      產品: 1760SMT分板銑刀

      Production Description :

      • Ideally suited for halogen-free and high Tg material up to 185°C and laminate with fillers

      Production Advantage :

      Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

       


      Continue reading →
    • 1704 Square Chip Breaker w Drill Pt

      產品: 1704狼牙棒

      Production Description :

      • Routing of inner and outer contours in halogen free and high Tg material ≥ 150°C and for depaneling, also with copper on outer layers

      Production Advantage :

      Suitable for halogen-free and high Tg material ≥150℃ and laminates with fillers. Optimized chip removal and stronger bending strength.

       


      Continue reading →
    • 1322 雙刃刀

      產品: 1322雙刃刀

      Production Description :

      Suitable for IMS made of aluminium and copper.

      Production Advantage :

      對比一般未鍍膜銑刀,行進速度提升20%,壽命增加12~20倍。
      鑽石CVD鍍膜承受800度高溫,在高速的加工過程中塗層亦不受影響,切割表面光滑,有效降低磨耗,提升刀具壽命、增加加工效率並確保加工品質穏定。

       


      Continue reading →
    • 159X 沉頭刀

      產品: 159X沉頭刀

      Production Description :

      Suitable for chamfering of holes and contours in IMS and PCBs.

      Production Advantage :

      Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

       


      Continue reading →
    • 138X 倒角刀

      產品: 138X倒角刀

      Production Description :

      • Suited for scoring and chamfering of flex-rigid PCB, high Tg material, laminate with fillers, aluminium and copper
      •Point angle=45°

      Production Advantage :

      Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

       


      Continue reading →
    • 1368 雙刃刀

      產品: 1368雙刃刀

      Production Description :

      • Ideally suited for depth routing of IMS, aluminium and copper, laminate with ceramic fillers
      • left twisted (down cut)

      Production Advantage :

      Suitable for SMT de-paneling of IMS made of aluminum and copper. Left twisted (Down Cut).

       


      Continue reading →

    PCB==>